| 产品规格︰ | INCH SIZE
Item No. CT-364A-04 : 1/4 inch O.D. Tube, 1/8 inch Nominal size, 9/16 inch Radius to center of tube.
Item No. CT-364A-05 : 5/16 inch O.D. Tube, 11/16 inch Radius to center of tube.
Item No. CT-364A-06 : 3/8 inch O.D. Tube, 1/4 inch Nominal size, 15/16 inch Radius to center of tube.
Item No. CT-364A-08 : 1/2 inch O.D. Tube, 3/8 inch Nominal size, 1-1/2 inch Radius to center of tube.
Item No. CT-364A-10 : 5/8 inch O.D. Tube, 1/2 inch Nominal size, 2-1/4 inch Radius to center of tube.
Item No. CT-364A-12 : 3/4 inch O.D. Tube, 5/8 inch Nominal size, 3 inch Radius to center of tube.
Item No. CT-364A-14 : 7/8 inch O.D. Tube, 3/4 inch Nominal size, 3 inch Radius to center of tube.
Item No. CT-364A-10-4 : 5/8 inch O.D. Tube, 1/2 inch Nominal size, 4 inch Radius to center of tube.
Item No. CT-364A-12-4 : 3/4 inch O.D. Tube, 5/8 inch Nominal size, 4 inch Radius to center of tube.
Item No. CT-364A-14-4 : 7/8 inch O.D. Tube, 3/4 inch Nominal size, 4 inch Radius to center of tube.
METRIC SIZE
Item No. CT-364M-06 : 6 mm O.D. Tube, 14.2 mm Nominal size, 9/16 inch Radius to center of tube.
Item No. CT-364M-08 : 8 mm O.D. Tube, 17.5 mm Nominal size, 11/16 inch Radius to center of tube.
Item No. CT-364M-10 : 10 mm O.D. Tube, 24.0 mm Nominal size, 15/16 inch Radius to center of tube.
Item No. CT-364M-12 : 12 mm O.D. Tube, 38.1 mm Nominal size, 1-1/2 inch Radius to center of tube.
Item No. CT-364M-16 : 16 mm O.D. Tube, 57.2 mm Nominal size, 2-1/4 inch Radius to center of tube.
Item No. CT-364M-19 : 19 mm O.D. Tube, 76.2 mm Nominal size, 3 inch Radius to center of tube.
Item No. CT-364M-22 : 22 mm O.D. Tube, 76.2 mm Nominal size, 3 inch Radius to center of tube.
Item No. CT-364M-16-4 : 16 mm O.D. Tube, 57.2 mm Nominal size, 4 inch Radius to center of tube.
Item No. CT-364M-19-4 : 19 mm O.D. Tube, 76.2 mm Nominal size, 4 inch Radius to center of tube.
Item No. CT-364M-22-4 : 22mm O.D. Tube, 76.2 mm Nominal size, 4 inch Radius to center of tube.
For bending annealed copper, aluminum, steel, stainless and hard copper tubing.
Each tool bends one size. Open side type which slips over tube at any point. Makes smooth short radius bends up to 180° with minimum effort. No marking, scraping or flattening of tubing. Calibrated to show angle of bend.
Movable hook tube benders furnished for 1/4 to 1/2 inch and 6 to 12 mm O.D. sizes have easy 90° start-require much less effort to make fast, accurate bends. Wide fixed hook simplifies operation, holds tubing securely.
|
|
|
|
